Adding, Updating or Deleting Datapoint(s)

You can easily add, change or delete a datapoint from an input in the Data tab of the Input Settings window of the input.

To add new datapoint(s)

1. Click Config sensors () in the Tools column.
• The Sensor Config window opens.
2. Click on the input you wish to configure.
• The Input Settings window opens.
3. In the Data tab, scroll to the bottom of the window.
4. Add the datetime you wish to add to the last row of the table. Enter the new Value for the datapoint.
5. Enter.

To change existing datapoint(s)

1. Click Config sensors () in the Tools column.
• The Sensor Config window opens.
2. Click on the input you wish to configure.
• The Input Settings window opens.
3. In the Data tab, update the datetime or the Value.
4. Enter.

To delete existing datapoint(s)

1. Click Config sensors () in the Tools column.
• The Sensor Config window opens.
2. Click on the input you wish to configure.
• The Input Settings window opens.
3. In the Data tab, delete the Value then the Datetime of the datapoint you wish to remove.